Sika Remover-208 (1 LT)

USE

Sika Remover-208 is used to remove excess uncured material from adhesives or sealants, tools or soiled surfaces.

Sika® Remover-208 can also be used to pre-clean extremely dirty non-porous substrates
.

Sika® Remover-208 can be used on painted surfaces prior to bonding.

Use Sika® Remover-208 in accordance with Sika's primer chart.

ADVANTAGES

Remove uncured adhesive. Remove as much Sikaflex® residue as possible with a spatula or knife. Dampen a rag or paper with Sika® Remover® - 208 and remove any remaining traces of adhesive or sealant.

Surface cleaning Wipe painted surfaces with a cloth or towel dampened with Sika® Remover® -208. Wet the cloth with the solvent, pouring the liquid onto the cloth. Never wet the paper with the cleaner, as this may contaminate it!

Wipe the surface with a damp paper. Use new paper towels regularly in order to maintain the cleaning power. Before the solvent dries on the surface (evaporates), wipe with a different clean and dry paper. Repeat the last two steps until there are no contaminants visible on the white paper. Do not use on delicate surfaces such as fresh paint.